IMREnvironmental Equipment, Inc.
COMBUSTION GAS ANALYZER
IMR 1400 CO


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
IMR-1400CO


IMR Environmental Equipment - IMR 1400
IMR 1400
The combustion gas analyzer IMR1400CO is easy to use, compact and rugged.
Two CO-sensors are installed, one for low CO-measurements and one for high measurements.
This helps to get the best possible accuracy for different applications (e.g. wood fired applications).

Measured parameters:
Oxygen O2, Carbon monoxide CO in ppm, Carbon monoxide CO in Vol.%

Calculated parameters:
Losses, combustion efficiency, excess air, carbon dioxidde

The series IMR1400CO can also measure draft, soot and stack gas temperature. 
IMR Environmental Equipment - IMR 1400 CO
IMR 1400CO-OVERVIEW
Rugged aluminum case with an additional compartment Memory for 200 measurements Gas sampling probe with heated handle; type K
Sensors: O2 - CO - CO Battery status is shown on the display; 6 hrs Combustion air probe
Illuminated and simultaneous display of 8 values High speed thermal printer that prints all values (incl. date and time) Condensation trap with integrated filter
7 fuels are programmed while 5 more are programmable CO-solenoid valve to automaticall switch between the low and high CO-sensor Operating temperature 50°F..104°F (10°C..40°C)
Engineering units:
ppm, mg, mg(O2), mg/kWh		 Electronic controlled soot measurement Storing temperature -4°F..122°F (-20°C..50°C)
Interface RS 232 3 minute zero point calibration with self-check Power supply  230V/50Hz, 110V/60Hz, 12VDC
TECHNICAL DATA
PARAMETER  PRINCIPLE RESOLUTION ACCURACY RANGE  1400 P
O2 Oxygen Electro-chemical 0.1 Vol.% ± 0.2 % 0-20.9Vol. %
ü
CO Carbon monoxide Electro-chemical 1 ppm Z  0-2,000 ppm
ü
CO Carbon monoxide Electro-chemical 1 ppm Z  O-4.000 Vol.% ü
NO Nitric oxide Electro-chemical 1 ppm Z 0-2,000 ppm
optional
NO2 Nitric dioxide Electro-chemical 1 ppm Z 0- 100 ppm  optional
SO2 Sulfur dioxide Electro-chemical 1 ppm Z 0-4,000 ppm
optional
TG Gas temperature NiCr-Ni thermocouple 1 K ± 2 % -4°F..2192°F
-20°C..1200°C
ü
TA Air temperature.  Semiconductor 1 K ± 0.5 K 4°F..248°F
-20°C..120°C
ü
P Draft Solid state 0.004" H2O
0.01 hPa		 ± 2 % -12"H2O/+20"H2O
-30hPa/+50hPa
ü
CO2 Carbon dioxide Calculation 0.1 Vol.% ± 0.2 % 0- CO2 max
ü
Combustion Efficiency / ETA Calculation 1 % ± 0.5 % 0-99,9 %
ü
Losses / qA  Calculation 1 % ± 0.5 % 0-99,9 %
ü
Excess air / LAMBDA Calculation 1 % ± 2 % 1,0-9,99
ü
Soot Filter paper      
ü
Other ranges are available upon request.
Z= 0-20% of the measuring range +/- 1% of the maximum value
Z= 21-100% of the measuring range +/- 5% of the displayed value.
4 sensors are the maximum for the IMR 1400 PS (4th sensor can be specified)
SPECIFICATION
Dimensions wxdxh: 16"(425mm) x 7"(185mm) x 11"(290mm)
Weight: approx. 15lbs. (5.8kg)

MODEL PART-NO.
IMR 1400 P       O2, CO, CO 14291

IMR Environmental Equipment, Inc. reserves the right to adopt technical modifications without prior notice

IMR Environmental Equipment, Inc.
3634 Central Ave.  -  St. Petersburg, FL 33711 USA
Phone: 727/328-2818  -  Toll free: 1-800-746-4467
Fax: 727/328-2826
Email: Info@imrusa.com
© Copyright 2006 IMR Environmental Equipment, Inc.