IMR Environmental Equipment, Inc.
COMBUSTION GAS ANALYZER
IMR 1100


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
IMR 1100
Hand held pocket size stack gas analyzer for combustion tests
on boilers, burners, etc.
  • small, rugged and easy to operate
  • Light weight
  • Infrared interface for a printer
  • Protective boot with integral magnet
  • Large backlit, triple display
  • Reliable technology and easy to service
  • Memory for 99 measurements
Measured parameters:
 Calculated parameters:
  • Oxygen O2
  • Carbon monoxide CO
  • Stack gas temperature
  • Ambient (room) temperature
  • Draft (optional)
  • Combustion efficiency
  • Excess Air
  • Carbon dioxide CO2
  • CO air free (cor. to 0% O2)
IMR 1100

          IMR-1100
STANDARD EQUIPMENT
Enclosure:
Rugged plastic case with a protective boot and magnet		 Measuring units:
ppm, mg/m3		 Power Supply:
4 x AA-batteries
> 8 hours 
LCD:
Three lines; illuminated		 Service program:
Check of all values		 Languages:
English, German, French, etc.
Fuels:
4 programmed		 Zero point calibration:
Max. 60 seconds
 Condensation trap:
With integrated filter
Sensors:
1100-1: O2
1100-2: O2, CO



TECHNICAL DATA
PARAMETER  PRINCIPLE RESOLUTION ACCURACY RANGE  1100-1
O2 Oxygen Electro-chemical 0.1 Vol.% ± 0.2 % 0-20.9Vol. %
ü
CO Carbon monoxide Electro-chemical 1 ppm ± 5 %  0-2000 ppm
1100-2
COp CO corrected 0% O2 Calculation 0.1 Vol.% ± 5 %  0-2000 ppm
1100-2
TG Gas temperature Type K 1°F/°C ± 0.3 % 32°F..1112°F
0°C..600°C
ü
TN Temperature (net)
 Calculation
 1°F/°C
 ± 0.3 %
 32°F..1112°F
0°C..600°C
ü
TA Air temperature Semiconductor 1°F/°C ± 0.3 % 32°F..212°F
0°C..100°C		 Optional
P Pressure / Draft
 Solid state
 0.01 in. WG
1 hPa		 ± 1 %
 0-20 in. WG
0-100 hPa
 Optional
CO2 Carbon dioxide Calculation 0.1 Vol.% ± 0.3 % 0- CO2max
ü
Combustion Efficiency/ ETA Calculation 0.1 % ± 1 % 0-99.9 %
ü
Excess Air / LAMBDA Calculation 0.1 % ± 0.2 % 0-250%
ü
Poison Index
 Calculation
 0.1 %
 ± 5 %
 0-99.9 %
 Optional
CO/CO2 ratio
 Calculation
 0.001
 ± 5 %
 0-.999 %
 Optional
Other measuring ranges are available upon request
Operating temperature: 32°F-104°F / 0°C-40°C (10-90% RH, non-condensing)
Storage temperature: -4°F-122°F / -20°C-50°C
Dimensions: 8" x 2" x 3.5" / 200mm x 45mm x 90mm
Weight: 2.2lb. / 1kg
OPTIONS / ACCESSORIES
 PART NO.
AC- adapter
 11002-AC
Infrared printer
 11002-PR
Gas sampling probe
 11002-GASP
Soft carrying case
 11002-SCAR
Hard carrying case
 11002-HCAR
Pressure / Draft measurement
 11002-PRE
Ambient temperature probe
 11002-ATEM
MODELS
 PART NO.
IMR 1100-1 O2, condensation trap, batteries, operators manual
 11002
IMR 1100-1 O2, CO, condensation trap, batteries, operators manual
 11002
IMR Environmental Equipment, Inc. reserves the right to adopt technical modifications without prior notice
IMR Environmental Equipment, Inc.
3634 Central Ave.  -  St. Petersburg, FL 33711 USA
Phone: 727/328-2818  -  Toll free: 1-800-746-4467
Fax: 727/328-2826
Email: Info@imrusa.com
© Copyright 2003 IMR Environmental Equipment, Inc.